TPSD2

TPSD2

Microprocessor Controlled Ferro-Resonant Technology

Output:
24,48,130, 260 VDC
6-200 Amps

Input:
Single Phase: 120/208/220/240/480 VAC
Three Phase: 208/240/480 VAC

Applications:
Utility
Switchgear
Process Control
Oil Exploration

  
The La Marche TPSD2 Battery Charger Series is designed to perform as Power Supply / Battery Eliminator. This model incorporates Controlled Ferroresonant technology to provide the DC system with dependable battery charger. TPSD2 Battery Charger Series is engineered for the demanding requirements of Switchgear, Process Control, Oil & Gas and other DC power applications.

• Microprocessor Controlled Ferro-Resonant Technology
• Digitally Configurable Parameter
• High Power Factor & Efficiency
• Low Harmonic Distortion
• Inherent and Electronic Current Limit Protections
• Temperature Compensation
• Reverse Polarity & Blocking Diode
• Secure Remote Monitoring and Communications 
 
Datasheets
User Manuals
Enclosures
 
AC InputSingle Phase
120VAC/1/60Hz
120/240/208VAC/1/60Hz
240/220/208VAC/1/60Hz
480VAC/1/60Hz
240/220VAC/1/50Hz
Three Phase
240/208VAC/3/60Hz
480VAC/3/60Hz
380VAC/3/50Hz
DC OutputDC Amps: 6 to 200 amperes
DC Volts: 24, 48 & 130VDC
Output Filtering (With or without a battery)30mV RMS for single phase models and
100mV RMS for three phase models.
DC Voltage Regulation Steady-State± 0.5% of setting from no load to full load over the specified input voltage, frequency and ambient temperature ranges.
Audible NoiseLess than 65dBA at any point 5 feet from any vertical surface of the enclosure.
Load SharingLoad sharing terminal located inside of unit. When connected, identical La Marche Units are forced to share the load within ± 5% for individual unitshare the load within ± 5% for individual unit outputs greater than 15% of the rated output.
PROTECTIONCurrent Soft Start
Current Limit
DC Breaker
AC Breaker
Operating Temperature0 to 50°C
Storage Temperature-40 to 85°C
Humidity0 to 95% Relative Humidity (Non-Condensing)
CoolingConvection cooled

Breakers and Protection017DC Breaker 2P
01C2P High Interrupting Capacity AC Breaker 65KAIC at 240VAC (This option may increase enclosure size)
01D2P High Interrupting Capacity AC Breaker 65KAIC at 480VAC (This option may increase enclosure size)
01F3P High Interrupting Capacity AC Breaker 65KAIC 240VAC (This option may increase enclosure size)
01G3P High Interrupting Capacity AC Breaker 65KAIC at 480VAC (This option may increase enclosure size)
102Blocking Diode
11LLightning Arrestor
Communications21JIEC 61850 Ethernet
21PDNP 3.0 Communications RS232/RS485/Ethernet
21QModbus Communications RS232/RS485/Ethernet
21SModbus RTU Serial Data Port RS232/RS485
21XSNMP
Controls11WExternal Temperature Probe 24ft
11YExternal Temperature Probe 100ft
Display551Digital Controller with VFD Display
Metering05CDC Current Transducer
206DC Voltage Transducer
Miscellaneous09CI.D.Tags (Black/White/Black)
09VI.D.Tags (White/Black/White)
Wire Markers, Documentation & Special Wiring09WHeat Shrinkable Wire Markers With Electrical Schematic