ESCR 125

ESCR 125

Smart Microprocessor Controlled SCR

Output:
16A @ 125VDC
25A @ 125VDC

Input:
120/208/240 VAC


Applications:
Utility
Switchgear
Process Control
Oil Exploration

  

The La Marche ESCR125 Model is designed specifically to provide an economical and robust solution for Auxiliary DC Control Power Systems in Substations. This Smart Microprocessor controlled Battery Charger is designed with PWM controls to provide the highest reliability that is required for maintaining and recharging the batteries, along with supporting the continuous loads in the auxiliary DC system. 

• Smart Microprocessor Controlled SCR Technology
• Filtered Battery Charger
• Automatic AC Voltage Compensation
• AC & DC Surge Protection (MOV)
• AC & DC Breaker
• Temperature Compensation
• Float/Equalize Mode Switch
• Digital Float and Equalize Adjustments
• Digital Current Limit Adjustment 50 to 110%
• ±0.5% DC Voltage Regulation
• Over Temperature Protection
• LCD Display
• Soft Start
• Meets NEMA PE5 and C62.41A
• UL/CUL 1012 (Pending)
• 2 Year Warranty

Datasheets
User Manuals
Enclosures
 
AC INPUT120/208 - 240 VAC ±10%, 50/60HZ, Single Phase
DC OUTPUT (Field Selectable)16A @ 125VDC
25A @ 125VDC
REGULATIONLine: <±0.5%
Load: <±0.5%
OUTPUT FILTERINGPer NEMA PE5 Filtered Charger
Input ProtectionBreaker with Surge Protection
Output ProtectionBreaker with Surge Protection
METERINGLCD DC Output Digital Voltmeter and Ammeter (1%)
Float Voltage2.12 - 2.35 volts/cell (Lead)
1.39 - 1.45 volts/cell (NiCad)
Equalize Voltage2.25 - 2.40 volts/cell (Lead)
1.45 - 1.6 volts/cell (NiCad)
Float and Equalize ButtonSwitch from Float to Equalize
ALARM CONTACTSAC Failure
Low DC Voltage
High DC Voltage
Charger Failure
LCD DisplayVolts
Amps
Status
LED IndicationsFloat (Green)
Equalize (Yellow)
AC ON (Green)
Charger Failure (Red)
Battery Fault (Red)
Current Limit (Red)
High DC Voltage (Red)
Low DC Voltage (Red)
Negative Ground Detection (Red)
Positive Ground Detection (Red)
Operating-20 to 70 C
Storage-40 to 85 C
Relative Humidity5% to 95% non-condensing
Structural DesignWall/Floor Mount NEMA 1 powder coated
Cable EntryBoth Sides
STANDARDSUL1012 (Pending)
CUL (Pending)
NEMA PE5
CE
C62.41A

 
Controls11WExternal Temperature Probe 24ft
11YExternal Temperature Probe 100ft
Enclosure Accessories080Drip Shield Kit
Miscellaneous09PConformal Coating PCB
10RAAR Hardware