Low Voltage Disconnect Panel

The La Marche Low Voltage Disconnect Panels automatically disconnect the DC load from the battery by means of a panel-mounted contactor. If the battery voltage drops below the preset level, a drop-out LED indicator on the front panel will illuminate and an alarm relay will de-energize, thus causing the contacts to change state. The load is reconnected automatically when the battery voltage returns to the desired voltage.

LD Data Sheet  


Register Your Product

Add a review

Other products in same category

FUSE PANEL-FP/FPR SERIES
  The front mounted blank panels can be used to shield exposed bus work from the front of the rack assembly to allow for easy expansion of an existing power rack system.  
La Marche Relay Racks can be used for mounting rectifiers, batteries and other related power system equipment.
Termination Buses and Lug Kits-GCB/GB/CB Series
The La Marche Disconnect Circuit Breaker Panel is designed to provide a quick and convenient method to disconnect either a battery, load, or charger from a DC power system.
Meter panels are provided to measure the DC voltage and current of the system.
The La Marche CDPD (Combination Distribution Panel Disconnect) center is designed for use with all La Marche rectifier systems built on a standard 23" rack frame.
La Marche Counter EMF panels provide a means of reducing the system DC voltage at the load when the charger(s) are set for battery equalize operation.  
The Manual Bypass Switch (MBS) provides a mechanical means to transfer between power sources to your critical loads.
  La Marche Relay Rack Mounted Battery Trays are beneficial if floor space is confined and batteries are to be mounted directly in the DC power system equipment racks.