GCB/GB/CB Termination Bus

La Marche Termination Bus Bars provide a convenient means of system ground or lead connections. These bus bars have insulated standoffs to electrically isolate them from the rack. Each bar is made of solid copper sized to handle its rated current and is available in either 19 or 23 inch relay rack mount. Termination bus bars can be provided with various quantities and sizes of solderless lugs. All termination bus bars greater than 200 amps are available for NEMA 2-hole lugs-please consult our factory or details. Model GCB Series Split Bus Termination is standard for all rack systems unless otherwise specified.


 GCB Data Sheet

 


Add a review

Other products in same category

FUSE PANEL-FP/FPR SERIES
Circuit Breaker Distribution Panels - BPK Series
  The front mounted blank panels can be used to shield exposed bus work from the front of the rack assembly to allow for easy expansion of an existing power rack system.  
La Marche Relay Racks can be used for mounting rectifiers, batteries and other related power system equipment.
The La Marche Disconnect Circuit Breaker Panel is designed to provide a quick and convenient method to disconnect either a battery, load, or charger from a DC power system.
Meter panels are provided to measure the DC voltage and current of the system.
The La Marche CDPD (Combination Distribution Panel Disconnect) center is designed for use with all La Marche rectifier systems built on a standard 23" rack frame.
The calibration mode allows adjustments to the drop-out and pull-in set points on a live system without disturbing the system voltage or the load.  
La Marche Counter EMF panels provide a means of reducing the system DC voltage at the load when the charger(s) are set for battery equalize operation.  
The Manual Bypass Switch (MBS) provides a mechanical means to transfer between power sources to your critical loads.
  La Marche Relay Rack Mounted Battery Trays are beneficial if floor space is confined and batteries are to be mounted directly in the DC power system equipment racks.