Circuit Breaker Distribution Panel

Circuit Breaker Distribution Panels are designed to provide protection for multiple load/distribution circuits. The circuit breakers fast trip response assures the Circuit Breaker Distribution Panel-BPK Series Data Sheet panel breaker will trip before the main circuit breaker/fuse so that the power will not be interrupted from other critical DC loads if an overload occurs. BPK Panels utilize UL recognized breakers with an interrupting capacity of 5,000 amps DC at 65 volts. Connection to the load is made directly to the load side terminal screw of the breaker. For breakers size up to 70 amps, the terminal is a 10-32 stud with a recommend maximum #6 AWG wire size. For 100 amp breakers, the terminal is a ¼ - 20 stud with a recommended maximum #4 AWG wire size. Base panel does not include circuit breakers. For information on available circuit breaker sizes, see list price sheet. A blank 1.75" high panel (1RU) is recommended below breaker panel for ease of installation.

BPK Data Sheet  

 


Add a review

Other products in same category

FUSE PANEL-FP/FPR SERIES
  The front mounted blank panels can be used to shield exposed bus work from the front of the rack assembly to allow for easy expansion of an existing power rack system.  
La Marche Relay Racks can be used for mounting rectifiers, batteries and other related power system equipment.
Termination Buses and Lug Kits-GCB/GB/CB Series
The La Marche Disconnect Circuit Breaker Panel is designed to provide a quick and convenient method to disconnect either a battery, load, or charger from a DC power system.
Meter panels are provided to measure the DC voltage and current of the system.
The La Marche CDPD (Combination Distribution Panel Disconnect) center is designed for use with all La Marche rectifier systems built on a standard 23" rack frame.
The calibration mode allows adjustments to the drop-out and pull-in set points on a live system without disturbing the system voltage or the load.  
La Marche Counter EMF panels provide a means of reducing the system DC voltage at the load when the charger(s) are set for battery equalize operation.  
The Manual Bypass Switch (MBS) provides a mechanical means to transfer between power sources to your critical loads.
  La Marche Relay Rack Mounted Battery Trays are beneficial if floor space is confined and batteries are to be mounted directly in the DC power system equipment racks.