Battery/Load/Charger Disconnect Panel BP Series

The La Marche Disconnect Circuit Breaker Panel is designed to provide a quick and convenient method to disconnect either a battery, a load or a charger from the DC power system. The Model BP Series Disconnect Panels utilize UL Listed single pole magnetic/ hydraulic circuit breakers*, and have termination points for input/ output connections to accommodate the cable size required for that particular Model BP Disconnect Circuit Breaker Panel. For long DC cable runs, consult the factory.

 

 BP Data Sheet 


Register Your Product

Add a review

Other products in same category

FUSE PANEL-FP/FPR SERIES
  The front mounted blank panels can be used to shield exposed bus work from the front of the rack assembly to allow for easy expansion of an existing power rack system.  
La Marche Relay Racks can be used for mounting rectifiers, batteries and other related power system equipment.
Termination Buses and Lug Kits-GCB/GB/CB Series
Meter panels are provided to measure the DC voltage and current of the system.
The La Marche CDPD (Combination Distribution Panel Disconnect) center is designed for use with all La Marche rectifier systems built on a standard 23" rack frame.
The calibration mode allows adjustments to the drop-out and pull-in set points on a live system without disturbing the system voltage or the load.  
La Marche Counter EMF panels provide a means of reducing the system DC voltage at the load when the charger(s) are set for battery equalize operation.  
The Manual Bypass Switch (MBS) provides a mechanical means to transfer between power sources to your critical loads.
  La Marche Relay Rack Mounted Battery Trays are beneficial if floor space is confined and batteries are to be mounted directly in the DC power system equipment racks.