AC Distribution Center (LAC)

The La Marche AC Distribution Panel provides overcurrent protection for your AC loads. Each panel can be equipped with up to 12 branch breakers. Expand your system’s capabilities using our field installable breaker kits. Installing the panel on a 19/23” rack is easy, using our versatile relay rack mounting brackets. Conduits landing can be made on the top or bottom. The panel has been made front-hinged and removable for safe and quick operation.

 


Register Your Product

Add a review

Other products in same category

La Marche Relay Racks can be used for mounting rectifiers, batteries and other related power system equipment.
  The front mounted blank panels can be used to shield exposed bus work from the front of the rack assembly to allow for easy expansion of an existing power rack system.  
FUSE PANEL-FP/FPR SERIES
Circuit Breaker Distribution Panels - BPK Series
Circuit Breaker Distribution Panels with Return Bus - BPKR Series
The La Marche Disconnect Circuit Breaker Panel is designed to provide a quick and convenient method to disconnect either a battery, load, or charger from a DC power system.
Termination Buses and Lug Kits-GCB/GB/CB Series
Meter panels are provided to measure the DC voltage and current of the system.
The La Marche CDPD (Combination Distribution Panel Disconnect) center is designed for use with all La Marche rectifier systems built on a standard 23" rack frame.
The calibration mode allows adjustments to the drop-out and pull-in set points on a live system without disturbing the system voltage or the load.  
La Marche Counter EMF panels provide a means of reducing the system DC voltage at the load when the charger(s) are set for battery equalize operation.  
  La Marche Relay Rack Mounted Battery Trays are beneficial if floor space is confined and batteries are to be mounted directly in the DC power system equipment racks.  
The Manual Bypass Switch (MBS) provides a mechanical means to transfer between power sources to your critical loads.
usc